TSC Alpha-40L RFID User Manual

73
7.6 RFID POWER
Description
This command is used to set the for optimal tag encoding. Sets the read/write power level to be used in the RFID encoder. Normally, this value is set
automatically by the RFID calibration process and should not be changed.
Syntax
RFID POWER read,write
Parameter
Description
Read
Custom tag read power level setting. (1~27)
Write
Custom tag write power level setting. (1~27)
Sample Code
Example
RFID POWER 12,16

TSC Alpha-40L RFID Specifications

General

Brand	TSC
Model	Alpha-40L RFID
Category	Barcode Reader
Language	English