Disclaimer:
The guidelines and suggestions for developing converted RFID labels, are provided by TSC Auto ID on an "as is" basis and without
warranty, expressed or implied. TSC Auto ID disclaims any implied warranty of merchantability or fitness for a particular purpose.
TSC Auto ID will not be liable under any circumstances for any damages or losses related in any way to use of these guidelines,
specifications or other information, including damages which may be incurred as a result of labels not working properly in a specific
application. All specifications are subject to change without notice. Testing of the converted labels in the printer is strongly
recommended prior to production quantities.
3.8.3 RFID Calibration
The Alpha-40L RFID printer has an RFID antenna coupler design that supports a wide variety of tag types. The antenna is affixed to
the front of the printhead.
1. Refer to ch.3.3 to load the RFID media into the media spindle.
To Next Page
Loading...
