TSC Alpha-40L RFID User Manual

62
This RFID button is used to do RFID calibration, and get the
three parameters through RFID calibration.
Note: Before performing an RFID calibration, you will first
need to select the right sensor for your RFID labels and run a
media sensor calibration.
It is read-only and used to show the number of tags
attempted to be written/ failed/ read RFID tags since the last
Clear Tag Stat operation has been initiated.
Press “Reset Counter” button to Clear Tag Stat.
Note: Please refer to Ch. 4.6 Interface for more information.

TSC Alpha-40L RFID Specifications

General

Brand	TSC
Model	Alpha-40L RFID
Category	Barcode Reader
Language	English