TSC Alpha-40L RFID User Manual

38
Item
Description
Default
Density
Set the printing darkness. Available setting range: 0 to 30.
16
Print Speed
Set the print speed.
6 (203dpi)
4 (300dpi)
3 (600dpi)
Tear Off
Adjust media stop location. Available setting value range: -120~120 dots.
0 dot
Print mode
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Tear Off
Print Width
Set the print width. Available setting range: 2 ~ 999 dots.
812
List Fonts
Print the current fonts list from the memory devices to the label.
N/A
List Images
Print current printer available images list stored at the memory device to the label.
N/A
List Formats
Print current printer available formats list from the memory devices to the label.
N/A
List Setup
Print current printer configuration to the label.
N/A
Control Prefix
Set control prefix character.
~
Format Prefix
Set format prefix character.
^
Delimiter Char
Set delimiter character.
N/A
Media Power Up
Set the action of the media when turning on the printer.
Feed: Printer will advance one label.
Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
No Motion

TSC Alpha-40L RFID Specifications

General

Brand	TSC
Model	Alpha-40L RFID
Category	Barcode Reader
Language	English