TSC PRINTRONIX ML240P User Manual

77 pages

To Next Page

To Previous Page

3.4 Loading the Fanfold/External Media

1. Open the printer right side cover.

2. Insert the fanfold media through the rear external label entrance chute.

3. Refer 3.3 to load the media.

Note: Please calibrate the gap/black mark sensor when changing media.

Loading path for fan-fold labels

Questions and Answers:

Need help?

Do you have a question about the TSC PRINTRONIX ML240P and is the answer not in the manual?

General

Print Technology	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Speed	6 ips
Connectivity	Serial RS-232
Label Width	0.5 to 4.33 inches (12.7 to 110 mm)
Label Thickness	0.003 to 0.01 inches
Power Supply	100-240V AC, 50-60Hz