EasyManuals Logo

TSC TA210 User Manual

TSC TA210
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
TA210/ TA310/ TA200/ TA300
Bar Code Printer Service Manual
24
3.11 Cutter Module Installation (Option)
1. Please refer to the section 3.6
to remove the platen roller
assembly.
2. Unscrew one screw to remove
the connector cover.
3. Plug in the cutter module
harness connector to the
8-pin white socket on the
main board.
4. Install back the connector cover and platen roller assembly.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC TA210 and is the answer not in the manual?

TSC TA210 Specifications

General IconGeneral
Print MethodThermal Transfer / Direct Thermal
Resolution203 DPI (8 dots/mm)
Processor32-bit RISC CPU
Max Print Speed5 inches per second
Memory8 MB Flash
ConnectivityUSB 2.0
Media HandlingFanfold
Power Supply100-240V AC, 50/60Hz

Related product manuals