How to troubleshoot a TSC Printer when the power indicator doesn't light up?
If the power indicator does not illuminate on your TSC Printer, it could be due to several reasons. First, the battery may not be properly installed; clean the battery metal contacts and reinstall the battery. If the battery metal contacts pins are with dirt, reinstall the battery. If the battery is dead, charge the battery.
Why is there a gray line on the label from my TSC TDM-20 Printer?
If you see a gray line on the blank label from your TSC printer, the print head or the platen roller is likely dirty. Clean the print head and the platen roller.
What to do if TSC Printer status shows 'Head Open'?
If the printer status from DiagTool shows “Head Open”, close the media cover.
Why is my TSC TDM-20 Printer printing irregularly?
If your TSC printer is printing irregularly, it might be in Hex Dump mode. Turn off and on the printer to exit the dump mode.
To Next Page
General
