How to correct printing position of small label on TSC TTP-2410M Pro Barcode Reader?
If the printing position of a small label is incorrect on your TSC Barcode Reader, calibrate the sensor sensitivity again.
How to resolve wrinkle problem on TSC TTP-2410M Pro Barcode Reader?
If you encounter the 'Wrinkle Problem' with your TSC Barcode Reader, adjust the print density settings to achieve good print quality. Ensure the label guide touches the edge of the media guide.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 104 mm |
| Memory | 8 MB Flash |
| Interface | USB |
| Operating System Compatibility | Windows |
| Label Thickness | 0.06 - 0.25 mm |
| Power Supply | AC 100-240V, 50/60Hz |
| Label Width | 25.4 mm - 114 mm |
Details the standard and optional features of the printer across different models.
Step-by-step guide for setting up the printer, including connections and power.
Detailed steps for loading and removing ribbons from the printer.
Instructions for loading various types of media, including rolls, fan-fold, and peel-off.
Explains how to adjust print head pressure and burn line for optimal print quality.
How to launch and navigate the printer diagnostic utility software.
Details diagnostic tool functions for printer calibration, setup, and testing.
Lists common printer issues and their potential causes and recovery procedures.
To Next Page