2
2. GETTING STARTED
2.1 Unpacking and Inspection
After receiving the bar code printer, carefully inspect the device and its packaging.
The printer is specially packaged to withstand damage in shipping. In case of
evident damage, contact the carrier directly to specify the nature and extent of
damage. Please retain the packaging materials in case you need to reship the
printer.
2.2 Equipment Checklist
One printer unit
One paper core for ribbon take up spindle
One quick installation guide
One power cord
One centronics interface cable
One 3” paper core adapter
One Windows labeling software/Windows driver CD disk
One 1” core label roll fixing tab
Separately purchased items may also be included. These additional items may
include:
Cutter module
Peeler kit module (included peel sensor)
Stand-alone LCD keyboard (KP-200, KU-007 series)
Memory module
Internal Ethernet print server
External 802.11b/g wireless print server
If any part is missing, please contact the Customer Service Department of your
purchased reseller or distributor.
To Next Page
Loading...
Need help?
General
