TSC TTP-268M User Manual

22
6. Stick the liner onto the paper core (with tab) and wind the spindle
counter-clockwise until the liner is properly stretched.
7. Close the print head mechanism.
8. Move the peel-off sensor toward the paper exit chute.
9. Using the front display panel, set the printer setting to peeler mode. Peeling will
automatically start. Press the FEED button to test.
Note:
*Please calibrate the gap/black mark sensor when changing media.
*Fits for the plain paper media, we recommend always qualifying any application with
thorough testing.
* Please refer to videos on TSC YouTube or driver CD.
Liner
Label

TSC TTP-268M Specifications

General

Brand	TSC
Model	TTP-268M
Category	Barcode Reader
Language	English