To Next Page
K
Karen HenryAug 25, 2025
What to do if my TSC TTP-286MT has a paper jam?
- TtturnerAug 25, 2025
If your TSC Printer has a paper jam, the labels may be stuck inside the printer mechanism. Remove any stuck labels from inside the printer.
What to do if my TSC TTP-286MT has a paper jam?
If your TSC Printer has a paper jam, the labels may be stuck inside the printer mechanism. Remove any stuck labels from inside the printer.
How to fix a TSC TTP-286MT Printer when the power indicator does not illuminate?
If the power indicator on your TSC Printer doesn't light up, make sure the power cord is properly connected to both the printer and the outlet, and that the printer is switched on. Also, ensure the printer carriages are closed.
Provides step-by-step instructions for setting up the printer, including connections and power.
Detailed instructions with images on how to load the ribbon into the printer.
Step-by-step guide on how to load roll labels and media in cutter mode.
Explains the function and adjustment levels of the print head pressure knob.
Provides guidance on adjusting printer parts to prevent ribbon wrinkles.
Explains how to calibrate and configure the printer's sensors.
Instructions on how to launch and start using the TSC Diagnostic Utility software.
Guides on configuring Ethernet settings using USB, RS-232, or Ethernet interfaces.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Operating System Compatibility | Windows, Linux, Mac OS |
| Power Supply | AC 100-240V, 50/60Hz |
| Memory | 8 MB Flash |
| Connectivity | USB, Serial |
| Operating Temperature | 5 ~ 40°C (41 ~ 104°F) |
| Storage Temperature | -20°C to 60°C |
| Operating Humidity | 20% to 85% (non-condensing) |
| Media Width | 25.4 mm to 110 mm |
| Label Thickness | 0.06 mm to 0.18 mm |
