3.1.3.4 Stop Bit(s):
Serial Comm. 4/5
Parity
Data Bits
> Stop Bit(s)
Stop Bit(s) 1/3
> 1
2
Exit
This option is used to set the RS-232 Stop Bits. The default setting is “1” stop bit.
Press and buttons to select the different Stop Bits and press
button to set the value into printer. When you enter this list, the option in
the right side of ">" icon is the printer current setting. Press key to
cancel the setting and return to the previous menu.
34
To Next Page
Loading...
Need help?
General
