Tunaylar Load Line 2 - Page 16

P1 GENERAL
P1.0 PURPOSE OF USE
P1.1 SINGLE INTERVAL /
MULTI RANGE /
MULTI INTERVAL
P1.2 DEFAULT VALUES
P2 PARAMETERS
P2.0 AUTO ZERO TRACKING
P2.1 AUTO ZERO TIME
P2.2 MANUAL ZERO
P2.3 INITIAL ZERO
P2.4 LOAD CELL GAIN RATE
P2.5 ADC INTERVAL FILTER
P2.6 DIGITAL FILTER
P2.7 STANDSTILL DETECT INT.
P2.8 STANDSTILL TIME
P2.9 TARE ENABLE
P4 CALIBRATION
P4.0 WEIGHT CALIBRATION
P4.1 SELF CALIBRATION
P4.2 GRAVITY PARAMETERS
P5 PORTS
P5.0 ALIBI MEMORY
P5.1 BAUD RATE FOR COM 1-2
P5.2 BAUD RATE FOR COM 3
P5.3
P5.4
P5.5
P5.6
P5.7
CONTINOUS PORTS
MANUAL PORTS
SLAVE PORTS
ADDRESS
RS 422/485 PORTS
P6 INPUT / OUTPUT
P6.0 OUTPUT OPERATING TYPE
P6.1 OUTPUT ASSIGNING
P6.2 OUTPUT SET WEIGHTS
P6.3 INPUT OPERATING TYPE
P7 PERIPHERALS
P7.0 MIN. LOAD FOR PRINTER
P7.1 TICKET FORMAT
P7.2 TICKET FIELDS
P7.3 TICKET LANGUAGE
P7.4 PAPER TYPE
P9 DISPLAY
P9.0 INTERNAL COUNT
DISPLAY
P9.1 CALIBRATION VALUE
DISPLAY
P8 ANALOG OUT
P8.0 ENABLE / DISABLE
P8.1
P8.2
P8.3
P8.4
RANGE
TYPE
MODE
CALIBRATION
P3 CONFIGURATION
P3.0 CAPACITY 1
P3.1 DIVISION 1
P3.2 DECIMAL POINT PLACE 1
P3.3 CAPACITY 2
P3.4 DIVISION 2
P3.5 DECIMAL POINT PLACE 2
P3.7
P3.6
DECIMAL POINT TYPE
WEIGHING UNIT
P3.8 OVERLOAD
- END -
15
KM.LL2E.002