TurboChef i5 Owner's Manual

16 THE INFO MODE
Info Mode
To access Info Mode, touch the “i” icon when the
oven is off, cooling down, or in manual mode.
From the Info Mode screen, access:
- Information
- Counters
- Options
- Settings
- Service
- Manufacturing (Mfg)
Info Mode: Information Screen
From the Information screen, view:
- Serial Number
- Menu Version
- Sage Firmware
- Phoenix Firmware
- Service Number
- VAC (Voltage) - View Incoming
- Tutorials: View information on installing,
operating, and maintaining the oven.
Info Mode: Counters Screen
From the Counters screen, view:
- Cook counter
- Total cook time
- Magnetron time
- Total time (oven on)
- Power cycles: The number of times the oven
has cycled power.
- Fault log: View time stamps of each fault
occurrence and the fault code.
Info Mode: Options Screen
From the Info Mode Information or Counters
screen, touch “Login” to access the Options screen.
When prompted, input the password 9 4 2 8 and
then touch “ENTER.”
From the options screen, enable/disable:
- Editing
- Cook More
- Load Menu
- Light Ring
- VAC
- Demo Mode
- Manual Cooking
- Diagnostic Mode
- F2 Bypass
Editing YES/NO:
Edit Mode enables or disables the portal that allows
the operator to change menu settings, rename food
groups and items, and change the cooking tempera-
ture. The Edit icon will be displayed at the bottom
of the screen (page 10) when this option is set to
YES. See pages 22-30 for more details on editing
menu settings.
Cook More YES/NO:
Cook More controls whether or not the three “cook
more” options appear when a cook cycle is done.
This option must be enabled in order to cook an
item beyond its original cook time. See page 13 for
details.
Load Menu YES/NO:
Load Menu enables or disables USB detection,
which allows the operator to upload and/or down-
load new menu settings from USB. Setting Load
Menu to NO will prevent the operator from loading
a menu. See page 20 for more details.

TurboChef i5 Specifications

General

Brand	TurboChef
Model	i5
Category	Oven
Language	English