26 THE EDIT MODE
Edit Settings
From the Item Editing Options screen (page 25), select “Edit Settings.” From the
Edit Settings screen the operator can:
- Edit % Time
- Edit % Air (Upper and Lower)
- Edit % Microwave
- Edit Cook Time
- Name an Item
- Run a Test Cook Cycle
Edit % Time
Touch a % Time icon to change, enter the new percentage, and touch “ENTER.” % Time can be set from
0-100% for each event. The sum of all events must be 100. Once all changes are made, touch “SAVE.”
Edit % Air (Upper and Lower)
Upper and Lower air are independently controlled. Touch the % Air to be changed and adjust it using the
sliding bar that appears below the grid. % Air determines the amount of airflow. The more air, the more
the product will brown or crisp. % Air can be set from 10-100% in 10% increments. Once all changes are
made, touch “SAVE.”
Edit % Microwave
Touch the % Microwave to change and adjust it using the sliding bar that appears below the grid.
% Microwave can be set from 0-100% in 10% increments. For example, 50% means the microwave system
will remain on for five continuous seconds for every ten seconds during the cook cycle. Once all changes are
made, touch “SAVE.”