turck TBEN-S2 User Manual

Parameterizing and Configuring
Connecting the devices to CODESYS PLC with Modbus TCP master
104
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Defining channel 1 (output data)
 Double-click the Modbus TCP Slave.
 In the register tab Modbus Slave Channel select Add Channel.
 Enter the following values:
Channel name
Access type: Write Singe Register
Offset: 0x0000
Length: 1 register
 Confirm with OK.
Fig.66: Defining the output register

turck TBEN-S2 Specifications

General

Brand	turck
Model	TBEN-S2
Category	Control Unit
Language	English