turck TBEN-S2 - Page 150

Parameterizing and Configuring
Configuring the devices at EtherNet/IP
150
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Class 151 (0x97) – Basic
This class data and parameters for the device’s basic functions.
Applies to:
n TBEN-S1-8DXP
Attribute no. Designation Get/
Set
Type Meaning
Dec. Hex.
Parameters
1 0x01 Activate output ch0 G/S USINT 0: no
1: yes
2 0x02 Activate output ch1 G/S USINT 0: no
1: yes
3 0x03 Activate output ch2 G/S USINT 0: no
1: yes
4 0x04 Activate output ch3 G/S USINT 0: no
1: yes
5 0x05 Activate output ch4 G/S USINT 0: no
1: yes
6 0x06 Activate output ch5 G/S USINT 0: no
1: yes
7 0x07 Activate output ch6 G/S USINT 0: no
1: yes
8 0x08 Activate output ch7 G/S USINT 0: no
1: yes
9 0x09 Manual reset after
overcurr. ch0
G/S USINT 0: no
1: yes
10 0x0A Manual reset after
overcurr. ch1
G/S USINT 0: no
1: yes
11 0x0B Manual reset after
overcurr. ch2
G/S USINT 0: no
1: yes
12 0x0C Manual reset after
overcurr. ch3
G/S USINT 0: no
1: yes
13 0x0D Manual reset after
overcurr. ch4
G/S USINT 0: no
1: yes
14 0x0E Manual reset after overcurr. ch5 G/S USINT 0: no
1: yes
15 0x0F Manual reset after overcurr. ch6 G/S USINT 0: no
1: yes
16 0x10 Manual reset after overcurr. ch7 G/S USINT 0: no
1: yes
17 0x11 Overcurrent VAUX1 ch0…3 G USINT 0: -
1: active