turck TBEN-S2 - Page 158

Parameterizing and Configuring
Configuring the devices at EtherNet/IP
158
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Class 165 (0xA5) – Basic
This class data and parameters for the device’s basic functions.
Applies to:
n TBEN-S2-8DIP
Attribute no. Designation Get/Set Type Meaning
Dec. Hex.
Parameters
1 0x01 Diagnostics ch0/1 –
overcurrent VAUX1 pin1 C0
G USINT 0: -
1: active
2 0x02 Diagnostics ch2/3 –
overcurrent VAUX1 pin1 C1
G USINT 0: -
1: active
3 0x03 Diagnostics ch4/5 –
overcurrent VAUX1 pin1 C2
G USINT 0: -
1: active
4 0x04 Diagnostics ch6/7 –
overcurrent VAUX1 pin1 C2
G USINT 0: -
1: active
5 0x05 Input value ch0 G USINT 0: off
1: on
6 0x06 Input value ch1 G USINT 0: off
1: on
7 0x07 Input value ch2 G USINT 0: off
1: on
8 0x08 Input value ch3 G USINT 0: off
1: on
9 0x09 Input value ch4 G USINT 0: off
1: on
10 0x0A Input value ch5 G USINT 0: off
1: on
11 0x0B Input value ch6 G USINT 0: off
1: on
12 0x0C Input value ch7 G USINT 0: off
1: on
Class 168 (0xA8) – Basic
This class data and parameters for the device’s basic functions.
Applies to:
n TBEN-S2-8DXP
Attribute no. Designation Get/Set Type Meaning
Dec. Hex.
Parameters
1 0x01 Activate output ch0 G USINT 0: -
1: active