TVLogic LEM-250A - Key Function Customization and Lock

FHD OLED Reference Monitor 29
[9] SYSTEM
5. Menu Operations
● KEY LED
- This item controls KEY LED ON/OFF.
- If the button with LED is pressed with the
KEY LED O, LED comes on but goes o after
5 seconds later.
● KEY FUNCTION 1
- User can select the function for [F1] button.
- Selectable functions: ASPECT, H/V DELAY,
FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL., OUTPUT MODE, FAST MODE,
FILTER, FORCE Psf, UMD, COLOR TEMP, BLUE
ONLY, PAGE 801, PAGE 888 and PAGE 889.
● KEY FUNCTION 2
- User can select the function for [F2] button.
- Selectable functions: ASPECT, H/V DELAY,
FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL., OUTPUT MODE, FAST MODE,
FILTER, FORCE Psf, UMD, COLOR TEMP, BLUE
ONLY, PAGE 801, PAGE 888 and PAGE 889.
● KEY FUNCTION 3
- User can select the function for [F3] button.
- Selectable functions: ASPECT, H/V DELAY,
FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL., OUTPUT MODE, FAST MODE,
FILTER, FORCE Psf, UMD, COLOR TEMP, BLUE
ONLY, PAGE 801, PAGE 888 and PAGE 889.
● KEY FUNCTION 4
- User can select the function for [F4] button.
- Selectable functions: ASPECT, H/V DELAY,
FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL., OUTPUT MODE, FAST MODE,
FILTER, FORCE Psf, UMD, COLOR TEMP, BLUE
ONLY, PAGE 801, PAGE 888 and PAGE 889.
● KEY LOCK
- This item locks all buttons on the front
panel except power, input select, and menu
buttons.
● FAN CONTROL
- This item toggles Fan Operation Control ON/OFF.
● IMAGE STICK MIN. (MIN)
- This item minimizes the image sticking by
reducing the screen brightness by 50% when
the video is stopped based on this set value
(in minutes).
- Value Range: Steps of 5 minutes increment
from OFF ~ 30 minutes.
PAGE II >> PAGE III
KEY LED
KEY FUNCTION 1
KEY FUNCTION 2
KEY FUNCTION 3
KEY FUNCTION 4
KEY LOCK
FAN CONTROL
IMAGE STICK MIN. (MIN)
ON
ASPECT
H/V DELAY
FREEZE
WAVEFORM
DISABLE
ON
OFF
LEM-250ASDI A