Important Safety Instructions
Your TVS Proton has been carefully designed to give you years
of safe, reliable performance. However, there are a few
basic precautions you should take to avoid hurting yourself
or damaging the unit:
Read the setup and operation instructions in the manual
carefully. Be sure to save it for future reference.
Do not place the printer on an unstable surface or near
a radiator or heat source.
Use only the type of power source indicated on the printer’s
label.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, make sure
the total ampere rating of all devices plugged into the
extension cord does not exceed the cord’s ampere rating.
During long printing time the printhead might get hot.
Do not touch the Printhead until it cools down.
Unplug the printer before cleaning, and use only damp cloth
for cleaning.
Do not spill liquid on the printer.
Except as specifically explained in this guide, do not
attempt to open or repair the printer yourself.
4
To Next Page
Loading...
