Continuous paper loading or feeding problems
The printer does not load continuous paper or does not
feed it properly.
1. Make sure the tractor feeders are locked.
2. Place the paper select lever in front position, if found
otherwise. For more information on setting the paper select
lever, see chapter 4.
3. Make sure the paper is stacked properly below the
printer stand.
4. Make sure the paper is loaded properly as per the
instructions given in the manual. For more information on
loading the continuous sheet, see chapter 4.
5. Make sure the paper thickness lever is set correctly to
match the thickness of your paper. For more information
on paper thickness lever, see chapter 4.
50
To Next Page
Loading...
