Setting the Units
ESC 0 Select 1/8 inch line spacing
ESC 2 Select 1/6 inch line spacing
ESC 3 Set n/216 inch line spacing
ESC A Set n/60 inch line spacing
ESC A Set n/72 inch line spacing
ESC 1 Select 7/72 inch line spacing
ESC D Select horizontal tabs
ESC B Select vertical tabs
ESC b Set vertical tabs in VFU channels
ESC / Select vertical tab channel
ESC e Set fixed tab increment
ESC a Select justification
Selecting characters
ESC ( 1 Assign character table
ESC t Select character table (Italic)
ESC x Select LQ or draft
ESC k Select typeface
ESC P Select 10.5 point, 10 cpi
ESC M Select 10.5 point, 12 cpi
ESC g Select 10.5 point, 15 cpi
ESC p Turn proportional mode on / off
ESC SP Set intercharacter space
ESC E Select bold font
ESC F Cancel Bold font
65
To Next Page
Loading...
