20
KNOW YOUR TVS WEGO
KNOW YOUR TVS WEGO
lever gently towards the handle grip. The brake lamp
glows on application of brake.
Handle Bar Left Side For WEGO Refresh
4. Head lamp high / low beam switch for Both
Versions
With the lights switch in ‘ON’ condition, press the
high/low beam switch towards ‘ ’ to operate high
beam of head lamp and towards ‘ ’ to operate the
low beam of head lamp.
5. Rear brake lock lever for Only Refresh Version
Rear brake lock is useful when your scooter is parked
with the side stand on a slope to avoid falling. To apply
rear brake lock, squeeze the brake lever towards the
grip and hold. Press and hold the brake lock lever and
release the brake lever. Ensure the brake is locked
properly.
Squeezing brake lever further releases the brake lock
(lock releases automatically).
Always use the appropriate turn signal lamps when you intend
to change lanes or take turns. Be sure to switch ‘OFF’ the turn
signal lamps after negotiating the lanes or turns. Similarly, use
appropriate head lamp beam ‘high / low’ as per the traffic and
road conditions for your safety and to avoid inconvenience to
other riders.
Warning
HANDLE BAR RIGHT SIDE
1. Front brake lever
The front brake is applied by squeezing the front brake
lever gently towards the throttle grip. The brake lamp
glows on application of brake.
To Next Page
Loading...
Need help?
General
