To Next Page

To Previous Page

MAINTENANCE

Maximum

Minimum

FUSE

Non-working of electrical systems may be due to

safety fuse failure. Short circuit or overload in the

electrical system are the main cause for fuse failure.

Follow the procedure given below for inspecting and

replacing the fuse.

1. Open the cover front as explained earlier.

2. Fuse case fitted on the battery band contains a

10A fuse. Pull out the fuse case from battery band.

Open the fuse case and pull out the fuse.

Extra fuse

3. Inspect the fuse for failure. If found defective,

replace the fuse (extra fuse is provided in the

wiring harness itself).

Good Fuse

Blown Fuse

Questions and Answers:

Need help?

Do you have a question about the TVS WEGO 110 and is the answer not in the manual?

TVS WEGO 110 Specifications

General

Engine Capacity	109.7 cc
Front Brake	Drum
Rear Brake	Drum
Wheel Type	Alloy
Kerb Weight	108 kg
Seat Height	770 mm
Front Suspension	Telescopic
Starting Method	Kick & Electric Start
Tyre Type (Front)	Tubeless
Tyre Type (Rear)	Tubeless
Wheel Size (Front)	12 inch
Wheel Size (Rear)	12 inch
Ground Clearance	150 mm
Engine Type	4-stroke, Single-cylinder, Air-cooled
Fuel Tank Capacity	5 liters
Rear Suspension	Unit Swing
Transmission	CVT