EasyManuals Logo

TVS WEGO 110 User Manual

TVS WEGO 110
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
43
MAINTENANCE
MAINTENANCE
Front brake (Disc brake)
A
2
3
4
You can observe master cylinder (1) on the right side
of the handle bar under the head lamp housing,
caliper assembly (2) fitted to the fork leg L, disc (3) on
the front wheel and high pressure hose (4) connecting
the master cylinder and the caliper assembly. A
window (A) is provided in the housing head lamp rear
for inspecting the brake fluid level.
1. Check the master cylinder fluid level on view
piece glass (B) through inspection window (A).
2. Brake fluid level always should be above the
‘LOWER mark (C) provided on the master
cylinder when the master cylinder is parallel to the
ground.
1
B
C
Note
Check the brake fluid level only when the master cylinder is
parallel to the ground.
Use suitable torch to have a clear vision while checking the
brake fluid level through inspection window.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TVS WEGO 110 and is the answer not in the manual?

TVS WEGO 110 Specifications

General IconGeneral
Engine Capacity109.7 cc
Front BrakeDrum
Rear BrakeDrum
Wheel TypeAlloy
Kerb Weight108 kg
Seat Height770 mm
Front SuspensionTelescopic
Starting MethodKick & Electric Start
Tyre Type (Front)Tubeless
Tyre Type (Rear)Tubeless
Wheel Size (Front)12 inch
Wheel Size (Rear)12 inch
Ground Clearance150 mm
Engine Type4-stroke, Single-cylinder, Air-cooled
Fuel Tank Capacity5 liters
Rear SuspensionUnit Swing
TransmissionCVT

Related product manuals