KANGAROO JOEY
™
5
Enteral Feeding Pump
Information Indicator
This indicates information only, and
does not require any immediate action.
EZ Pump Mode Indicator
Indicates that EZ Pump Mode feature is activated.
Communication Indicator
Indicates that communication feature is activated.
Volume to be Delivered Indicator
Indicates that a VTBD has been programmed.
Keep Tube Open
Indicates that Keep Tube Open feature is in operation.
Section IV — Initial Setup
Attaching the A/C Adapter Power Cord
Plug the Power Cord into the A/C Adapter Port on the back of the pump. See Figure 1A to locate port on pump.
NOTE: It is important to make sure the power plug is pushed all the way into the pump for proper operation. If the display screen
shows the pump is running on battery power after plugging in the A/C Adaptor, check to make sure the A/C Adaptor plug is flush
with the back of the pump.
Figure 2A. Alignment of
A/C Adapter plug with
pump’s adapter port.
"$"EBQUFS
1PSU
"$"EBQUFS
1MVH
6TFDBSFBMJHOJOHBEBQUFS
XJUIQVNQDPOOFDUPS
AC Adapter
Plug
AC Adapter
Port
scale 2:1
Do not detach the connector by pulling on the cord only.
(A cord extension accessory is available that will allow the wall plug to be separated from the power transformer, see Fig. 2B. The
cord extension order number is located on page 38.)
To Next Page
Loading...