DESCRIPTION OF TRACTOR CONTROLS
2 - 26
Rear PTO
PTO speed 540 rpm
Operate the PTO shift lever only
after setting the PTO ON/OFF
switch to the OFF position.
•
NOTE
45NO237A
PTO
Safety
Cover
PTO Shaft Cap
PTO SHAFT CAP
When the PTO shaft is not in use,
grease the PTO shaft and install the
cap to it.
►
It is dangerous to use an imple-
ment at a high speed if it is de-
signed to be operated at a low
speed.
Before using an implement,
make sure to read its owner's
manual.
•
•
CAUTION
EXTERNAL POSITION LEVER
It is used to lift or lower an imple-
ment to the desired position and
hold it at that position.
<How to operate>
Lifting an implement: Push the le-
ver up.
Lowering an implement: Pull the
lever down.
►
T5NO211A
External
position
lever
To Next Page
Loading...
