DESCRIPTION OF TRACTOR CONTROLS
2 - 32
(2) How to disengage coupler
①
Lower the implement on the
ground to release pressure in
the hydraulic hose.
② Stop the engine and operate the
remote hydraulic lever to remove
any residual pressure in the
hose.
③
Disconnect the male coupler on
the implement side while mov-
ing its external ring on the tractor
side backward slightly.
④
Wipe oil and dust from the cou-
pler and plug the dust cover.
To prevent a burn and skin
damage, make sure to stop the
engine before connecting or
disconnecting the coupler.
Do not use your hands to check
for oil leakage.
•
•
WARNING
To Next Page
Loading...
