2
Content
1 Control Box Hardware ......................................................................................... 3
1.1 Inner structure of the Control Box ............................................................ 3
1.2 External Interface of the Control Box ....................................................... 4
1.3 Power Specification .................................................................................. 7
1.4 Change the Fuse ........................................................................................ 7
2 The Introduction to the Operation Panel and the Sewing Operations ............ 8
2.1 Operation Panel Introduction .................................................................... 8
2.2 Start up ...................................................................................................... 9
2.3 Sewing of the Standard Patterns ............................................................. 10
2.4 Sewing of the Left/Right Scallop pattern ................................................ 11
2.5 Sewing of the left/right Bline Stitch pattern ........................................... 12
2.6 Sewing of the left/right T Stitch pattern .................................................. 13
2.7 Sewing of ROM pattern .......................................................................... 13
2.8 Work zigzag width setting....................................................................... 14
2.9 The Work Feed Pitch Length Setting ...................................................... 14
2.10 Sewing Speed Setting ............................................................................. 14
2.11 Start Condensation Operation ................................................................. 15
2.12 End Condensation Operation .................................................................. 17
2.13 Setting the Position of the Sewing Base line .......................................... 18
2.14 Needle Left/Right Stopping .................................................................... 18
2.15 Needle Up/Down Stopping ..................................................................... 19
2.16 Flip operation .......................................................................................... 19
2.17 Stitch-counted Sew ................................................................................. 19
2.18 The Enable and Disable of the Presser Foot Lifter ................................. 20
2.19 The Enable and Disable of the Trimmer and Wiper ............................... 20
2.20 Half Stitch Motion .................................................................................. 20
2.21 The Use of Reverse Button ..................................................................... 21
2.22 Restore the Default Setting ..................................................................... 21
2.23 Use Patterns in U-Disk ............................................................................ 21
3 Download Pattern From PC to Machine .......................................................... 23
4 Create Pattern Through Control Panel ............................................................ 25
5 Setting the System Parameter ............................................................................ 28
5.1 The list of the System Parameter ............................................................ 28
5.2 The Setting of the System Parameters .................................................... 30
5.3 The Description of Specific Parameters ................................................. 31
6 The Test of IO Device .......................................................................................... 31
6.1 The Test of Input Device ......................................................................... 32
6.2 The Test of Output Device ...................................................................... 32
7 Error Code and Processing Method .................................................................. 33
8 Appendix—ROM Pattern Table ........................................................................ 35
To Next Page
Loading...
