34
Er23 No sewing pattern Choose another sewing pattern
Er24
Sewing pattern contain
invalid data
Modify the sewing pattern
Er45
Stitch number of current
sewing pattern exceed
the Max. stitch limit
Reduce the total stitch number of current pattern.
Er55
Pattern already exist in
U-Disk
Whether overwrite the pattern with same number
Er56
Pattern already exist in
ROM memory
Whether overwrite the pattern with same number
Er57
No enough pattern
memory
Clear pattern memory space
Er58
Read failure from
U-Disk
Check U-Disk connection
Er59
U-Disk File Format
Uncompatible
Convert the file format of U-Disk
Er61 Power Off Check the AC power supply
Er62 Voltage too high Check the AC power supply
Er63 Voltage too low Check the AC power supply
Note: Er01~Er20 is the fatal error warning.You must fix the failure before working.Er21-Er24 is
the common fault.You can clear the error display by press the “Half Stitch Motion” key and then
go on working. But this operation can’t fix the error.
The control box maintain an error log.User can view this error log. To enter the
view mode, please keep pressing “Half stitch move” key when the power of the
control box is turned on.
To Next Page
Loading...
