Tyro Go EFTPOS reader user guide 6
Return to table of contents
Payment
Reader Internet
Hello, Happy Business
Card payment
One time payment
More option
10:00
4G
2.8 Charging your Tyro Go
Using the supplied USB charging cable, plug the cable into the port on your
Tyro Go, and the other end into a powered USB port.
When charging, the green LED light will blink. The green light will stop flashing
when your Tyro Go is fully charged. Charging times vary depending on usage
since the last charge, but it should take no more than two hours to charge if
not in use.
You can use Tyro Go while charging.
A fully charged battery can last for 8 hours with regular usage and 24 hours
if the reader is idle. Tyro Go will disconnect from the app and shut off after
2-3 minutes of inactivity.
To Next Page
Loading...