Uconnect 430 - Adding Points to the Active Route; Changing the Destination of the Active Route; Stopping the Route; Taking a Detour

Adding Points to the Active Route
1. While navigating a route, touch to return to the
main menu.
2. From the main menu, touch Where To?.
3. Select a category.
4. If necessary, select a subcategory.
5. Select a destination.
6. Touch Go!.
7. Touch Add as a Via Point.
Changing the Destination of the Active Route
Before you can change destinations, you must be navi-
gating a route.
1. Touch
to return to the main menu.
2. Touch Where To?.
3. Search for the location.
4. Touch Go!.
5. Touch Set as a New Destination.
Taking a Detour
While navigating a route, you can use detours to avoid
obstacles ahead of you, such as construction zones.
NOTE: If the route you are currently taking is the only
reasonable option, the navigation system might not cal-
culate a detour.
1. While navigating a route, touch
.
2. From the main menu, touch Detour.
Stopping the Route
1. While navigating a route, touch .
2. From the main menu, touch Stop.
1
Uconnect姞 430/430N 91