178
Set the center angle:
1. If 0< center angle (°) <360 ° or center angle (°) > 360 °, the motion path
of the robotic arm is a circular arc of the corresponding degree;
center angle = 60°, the motion trajectory of the robotic arm is:
2. The center angle (°) = 360 °, the movement track of the robotic arm is a
complete circle;
3. If you want to draw multiple circles continuously (for example, draw
10 circles continuously), set center angles equal to 3600°;
Blockly example:
【move circle position 1 to position 2】: From current position, the whole
circle is determined by current position
To Next Page
Loading...
