25
1.2. Robot Installation
1.2.1. Safety Guidelines for the Robot Environment
1. Make sure the arm is properly and safely installed
in place. The mounting surface must be
shockproof and sturdy.
2. To install the arm body, check that the bolts are
tight.
3. The robotic arm should be installed on a sturdy
surface that is sufficient to withstand at least 10
times the full torsion of the base joint and at least
5 times the weight of the arm.
1. The robotic arm and its hardware composition
must not be in direct contact with the liquid, and
should not be placed in a humid environment for
a long time.
2. A safety assessment is required each time
installed.
Press the button to power off the 850;
Rotate the button, the ROBOT power
indicator of the 850 lights up.
Users can remove the dust filter, clean
the dust from the vent, and then
reinstall it.
To Next Page
Loading...
