78
effector by simply drag and drop the code blocks.
Settings: It is used to set the parameters of the robot arm, to pass the
settings, safety settings, system software upgrade, etc.
1.3.1 Toolbar
Window: To adjust its size, you can make a selection in the 【Window】
drop-down menu or adjust the size by dragging the border of
the window.
Language: Switch language in the upper right corner of the toolbar -
【Language】 may switch between Simplified Chinese /
English.
Tool: 【Tools】 - 【Search】 to return to the interface of ‘search the
robotic arm’.
【Tools】 - 【Check for Updates】 to check the software updates.
Help: 【Help】Use the drop-down window to download the manuals of
the robotic arm, contact technical support, open forums, and visit
GitHub.
To Next Page
Loading...
