File name
Entering the record name associated with the record file.
Logger
File Name
Test 13/06/17
Number of data
Choose the the number of variable data to be recorded
Period
Choose sampling period value
Data X
Select the «X» data type (Status, Flowrate, Velocity...)
This must be done for all the recorded data
Type
Select the type of record (applicable for all recorded datas)
• Average
• Average + Min + Max
• Average + Min + Max + Std
Mesurement config. / Config. Management
Set-up modes
Measurement config. / Settings level
Simple
Contains the minimum parameters necessary for making water
flow measurements
Simple
Normal
Advanced
Normal
Contains the essential parameters for making all product flow
measurements
Simple
Normal
Advanced
Advanced
Contains all Minisonic II available parameters
Settings level
Simple
Normal
Advanced
The Minisonic II was designed to adapt to the user’s knowledge of making ultrasonic flow measurements
Measurement config.
Probes distance
US Signal display
Auto zero
Measurement config.
Probes distance
US Signal display
Auto zero
Flowrate measurement
Measurement config.
Logger
Inputs / Outputs
Low power mode
Off
Mode
Power saving
Sequencer
(....)
Setting level
Measurement config.
Logger
Inputs / Outputs
Low power mode
Measurement config. / Low power mode
Setting up battery safety modes
O
The flowmeter is functioning continiously without any power safety option
Off
Mode
Power saving
Sequencer
Low power
OLED display shut o and flow calculation reduced to 1 per second
(Display switch on again by pressing any key)
Off
Power saving
Sequencer
Sequencer
Mesurement duration indicates how long is each periode of active and
continuous flow calculation
Period indicates how often the instrument wakes up
Off
Mode
Power saving
Sequencer
(....)
To Next Page
Loading...
Need help?
General
