Ultraflux Minisonic II Portable User Manual

28
Configurations management
Reset config.
Delete all data from the current configuration
(Return to default configuration values)
Question
Are you sure you want
to delete?
Cancel
OK
Save config.
Save measurement configuration data
Save config.
New
Test 1
Test 2
Batch 7
Load config.
Upload measurement configuration data for immediate use
Load config.
Daily test
Test #4
Test #1
Batch #6
Delete config.
Delete configuration menu
Delete selected configuration or All
Delete config.
Delete selection
Select all
Test 5
Batch 8
Measurement config. / Config. Management
Menu
Measurement config.
Probes distance
US Signal display
Auto zero
Setting level
Measurement config.
Config . Management
Inputs / Outputs
Low power mode
Display the distance between the probes to be fitted
Probes distance
Probes distance
Display of the distance to be fitted between the probes. This
distance is calculated by the device from the parameters ente-
red in the device:
• Diameter / thickness / pipe material
• Type of uid
• Type of probes
Probes distance
18,4 mm
If you moved the probes
it is recommended to
reset the measurement
(....)
Menu
Measurement config.
Probes distance
US Signal display
Auto zero
Menu
Measurement config.
Probes distance
US Signal display
Auto zero

Ultraflux Minisonic II Portable Specifications

General

Brand	Ultraflux
Model	Minisonic II Portable
Category	Measuring Instruments
Language	English