UNI-T UTD2025 series User Manual

Uni
-
Trend Technology (Chengdu) Ltd
.
Page
20
of
27
Communica
tion & Control So
ftware for
UTD20
25
_30
25
Series Oscilloscopes
User
Manual
Chapter 3 Operation guide for the oscilloscope communication
and control so
ftware
By now you should have grasped the basic structure, menu options and functions of the oscilloscope
communication and control software. In the following pages you will find more detailed instructions on how to
operate the software. In this chapter,
we will give guidance on USB, LAN
and
GPIB control modes.
To enjoy optimal software performance, we recommend you to read the oscilloscope user manual and this chapter
to familiar
with application.
After installing the software and driver properly, conn
ect the cable to the USB A
-
B communication port. Power on
the oscilloscope and activate the software. The software control panel shown in Fig 3
-
1 will appear on your
computer screen.
Fig 3
-
1

UNI-T UTD2025 series Specifications

General

Brand	UNI-T
Model	UTD2025 series
Category	Test Equipment
Language	English