UNI-T UTD2025 series User Manual

Uni
-
Trend Technology (Chengdu) Ltd
.
Page
3
of
27
Communica
tion & Control So
ftware for
UTD20
25
_30
25
Series Oscilloscopes
User
Manual
Chapter 1 Installation of the oscilloscope communication
and control software
1.1
Hardware requirements
Equipment requirements
Minimal.
Oscilloscope
UTD2025_3025
Series Digital Storage Oscilloscope.
Compute
r
Windows 2000/XP/Vista, 128 MB RAM, 16x CD
-
ROM or better (Vista users
please refer to its individual hardware requirements), SVGA display or better.
Connection cable
USB A
-
B cable or RJ45 net cable or GPIB communication cable.
1.2
Installing the software
Your
UTD2025_3025
Series Digital Storage Oscilloscope (“Oscilloscope”) comes with an oscilloscope
communication and control software (contained in the CD
-
Rom supplied with your oscilloscope).
Alternatively, you can download the software online :
File name
:
UTD2025_3025
oscilloscope communication and control software.
Installation :
Step one :
Insert the CD
-
rom supplied with your oscilloscope into the CD
-
Rom drive of the computer.
Wait for the system to read and find the oscilloscope communication and
control software
contents (Fig. 1
-
1).
Fig 1
-
1
Note :
1.
The installation pack downloaded online must be unzipped before application.
2.
The software supports Windows 2000, Windows XP and Vista operat
ing systems. On Vista only
USB2.0 communication protocol is supported.
Step two :
Double left click the mouse to run the oscilloscope communication and control software
installation as shown in Fig 1
-
1.
The installation wizard for the oscilloscope communi
cation and control software will pop up, as
shown in Fig. 1
-
2.

UNI-T UTD2025 series Specifications

General

Brand	UNI-T
Model	UTD2025 series
Category	Test Equipment
Language	English