26
HOISTING (LIFTING) UP THE LIFT TRUCK
WARNING
!
• Only use this method as a last resort to move the lift truck. If
the normal application requires repeated lifting, a permanent
lifting device/platform will be needed. You can contact your
Local Authorized Dealer to get the axle truck weights.
When lifting the entire lift truck, secure cables/wire ropes to holes
on both sides of the outer mast cross beam and to the holes on the
counterweight, and then utilize a lifting device.
Front Side
Rear Side
WARNING
!
• Make sure that the cables/wire ropes
do not interfere with the overhead
guard while lifting the lift truck.
• Make sure that cables/wire ropes and
the lifting device are strong enough to
support the lift truck safely, as the lift
truck is extremely heavy.
• Do not use the overhead guard to lift
up the truck.
• Never get under the lift truck while
lifting it.
2W inner chain, 2F, 3F mast
To Next Page
Loading...
