84
CLOSE OPERATION
1. Make sure the steering wheel is tilted upward.
2. Since there is reaction of the gas stay, press down on the front top
portion of the hood (top panel) until it is securely locked in place.
3. Raise the backrest of the operator's seat up to the original position.
4. Pull the steering wheel toward the operator's side to the limit so
that it is locked.
WARNING
!
• To avoid pinching your ngers, always press down on the top
of the hood (top panel).
• Make sure the top panel is securely locked.
TILT STEERING WHEEL
The position of the steering wheel can
be adjusted. To adjust, push down on
the tilt lever (black) located on the left
side of the steering column, and move
the wheel to the desired position. After
selecting the wheel position, pull up the
lever fully to lock.
WARNING
!
• Before adjusting the steering wheel, turn the ignition switch
off and set the parking brake.
• Be sure to adjust the steering wheel position while the lift
truck is stationary.
• After adjustment, force the steering wheel upward or
downward to assure it is locked securely.
SERVICE RELEASE LATCH
Press the steering wheel forward while
depressing the service release latch
(yellow) on the left side under the steering
wheel, and the steering wheel tilts
forward.
For returning the steering wheel to
the original position, pull it toward the
operator's seat to the limit. The service
release latch returns to the original
position and the steering wheel is locked
automatically.
WARNING
!
• Before starting the engine, make sure that the steering wheel
is returned to the original locked position.
• Do not operate the lift truck with the steering wheel in the
service release position. Doing so could result in an accident.
Tilt lever (black)
Lock
Service release
latch
Release
To Next Page
Loading...
