Unify OpenStage User Manual

c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
117
Nur für den internen Gebrauch Phone Parameters - Administration
System
Bridging enabled bridging-
enabled
Boolean true/false
Default:
false
Determines whether
bridging is enabled
Dial plan enabled dial-plan-
enabled
Boolean true/false
Default:
false
If active, dialplan is en-
abled.
FPK program
timer
fpk-long-
press-timer
Enumer-
ation
0 to 5
Default: 2,
DPIP35: 0
0 (=OFF) means no long-
press timer is active.
If set to 2 (=ON) and an
FPK is pressed for 2 sec-
onds, it enters program-
ming mode.
Other values are not ac-
tive and reserved for fu-
ture use.
Relevant for OpenStage
15/40/60/80.
Available with OpenStage
V2R2.
Group pickup
tone allowed
group-pickup-
tone-allowed
Boolean true/false
Default: true
If enabled, an acoustic
signal is created for in-
coming pickup group
calls.
Group pickup as
ringer
group-pickup-
as-ringer
Boolean true/false
Default: true
Determines whether the
current ringtone or an
alert beep is used.
Group pickup
visual alert
group-pickup-
alert-type
Enumer-
ation
0=Prompt;
1=Notify;
Default: 0
Defines the user action
required to accept a pick-
up call.
BLF alerting blf-tone-type Enumer-
ation
0=beep;
1=ring tone
Default: 0
Selects the sound for indi-
cating an incoming call for
the monitored extension.
Available with OpenStage
V2R1.
MLPP ringer Not relevant.
WBM Name Item name Type Values Description

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing