Unify OpenStage

Phone Parameters - Administration Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
118 Provisioning Service, Developer’s Guide
c04.fm
System
Callback ringer ccss-ringer Enumer-
ation
0=alert-inter-
nal
1=alert-exter-
nal
Default: 0
Specifies a distinctive
ringer to be be used with
the Call back prompt to
announce the availability
of a call back call to a tar-
get
Impact ringer lev-
el
IL-lower-
ringer
Enumer-
ation
0=alert-inter-
nal
1=alert-exter-
nal
2=Impact-level
Default: empty
Select ringer to be played
to alert the user to a new
incoming call from a Low-
er IL
Recorder
Address
call-record-
phone-number
Call
number
SIP DN / call number of
the voice recorder.
Recording
mode="Disabled"
call-record-
auto-start
Boolean false No call will be recorded,
and the corresponding
FPK function (Section
4.4.5.3, "Call recording")
is disabled.
Available with OpenStage
V2R2.
call-record-
all-calls
Boolean false
feature-
availability
index="24"
Boolean false
Recording
mode="Manual"
call-record-
auto-start
Boolean false Call recording can be
started and stopped with
the FPK function.
Available with OpenStage
V2R2.
call-record-
all-calls
Boolean false
feature-
availability
index="24"
Boolean true
Recording
mode=
"Auto-start"
call-record-
auto-start
Boolean true Call recording is started
when a call is estab-
lished, and can be
stopped with the FPK
function.
Available with OpenStage
V2R2.
call-record-
all-calls
Boolean false
feature-
availability
index="24"
Boolean true
WBM Name Item name Type Values Description