c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
131
Nur für den internen Gebrauch Phone Parameters - Administration
System
Ring on/off line-ring
<index>
Boolean true/false
Default: true
When set to true,
the line will ring on
an incoming call,
and a popup will ap-
pear on the display.
When set to false,
the incoming call will
be indicated only by
the key’s LED.
Also configurable by
the user.
Ring delay (sec-
onds)
line-ring-
delay
<index>
Integer 0 to 65 535
(seconds)
Default: 0
Delay before the
ring tone will start on
an incoming call.
Selection order line-hunt-
sequence
<index>
Integer 1 to maximum number
of lines for this phone.
When the user lifts
the handset in order
to initiate a call, the
line to be used is de-
termined by this val-
ue. If more than one
lines have the same
rank, the selection is
made according to
the key number.
Address line-sip-uri
<index>
Text Default: NULL Call number resp.
SIP name corre-
sponding to the en-
try in the SIP regis-
trar (AoR) at which
the line is to be
registered.
Realm line-sip-
realm
<index>
Text Default: NULL Used for authenti-
cated access to the
SIP server. Any
combination of user
id and password is
meaningful only
within the realm it is
assigned to.
WBM Name Item name Type Values Description
To Next Page
Loading...
Need help?
General
