c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
159
Nur für den internen Gebrauch Phone Parameters - Administration
System
4.4.5.7 Keyset operation
WBM Name Item name Type Values Description
Rollover ring line-rollover-
type
Enumer-
ation
0=no ring;
1=alert ring;
2=standard
ring;
3=alert beep
Default: 3
Determines how an in-
coming call on a different
line is indicated during an
active call. When "no
ring" is selected, the in-
coming call will not ring;
"alert ring" selects a 3
seconds burst of the con-
figured ring tone; "alert
beep" selects a beep in-
stead of a ring tone;
"Standard ring tone" se-
lects the default ringer.
LED on registra-
tion
line-
registration-
leds
Boolean true/false
Default: true
Determines whether the
line LEDs will be lit for a
few seconds if they have
been registered success-
fully with the SIP server
on phone startup.
Originating line
preference
originating-
line-
preference
Enumer-
ation
0=idle line;
1=primary;
2=last
3=none
Default: 0
Determines which line will
be used when the user
goes off-hook or starts
on-hook dialing.
When "idle" is selected,
the line selection is based
on the rank specified for
each line; with "primary",
the primary line is select-
ed; with "last", the line
that has been used last is
selected, and with "none",
the user must select a line
manually.
To Next Page
Loading...
