Phone Parameters - Administration Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
160 Provisioning Service, Developer’s Guide
c04.fm
System
Terminating line
preference
terminating-
line-
preference
Enumer-
ation
0="ringing
line"
1="ringing
PLP"
2="incoming"
3="incoming
PLP"
4="none"
Default: 0
Decides which terminat-
ing line, i. e. line with an
incoming call, is selected
when the user goes off-
hook.
When "ringing line" is se-
lected, the line in ringing
state is automatically se-
lected when the user
goes off-hook. If multiple
lines are ringing, the line
that has been alerting the
longest is selected.
With "ringing PLP", the
line in ringing state is au-
tomatically selected
when the user goes off-
hook. If the prime line is
alerting, it is given priority.
With "incoming", the earli-
est line to start ringing is
selected, or else the earli-
est alerting line is select-
ed.
With "incoming PLP", the
earliest line to start ring-
ing is selected, or else the
earliest alerting line is se-
lected. However, if the
prime line is alerting, it is
given priority.
With "none", the user
manually selects a line by
pressing its line key be-
fore going off-hook to an-
swer a call.
WBM Name Item name Type Values Description
To Next Page
Loading...
