Unify OpenStage User Manual

Phone Parameters - Administration Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
172 Provisioning Service, Developer’s Guide
c04.fm
System
4.4.6.4 Access Control (V3)
WBM Name Item name Type Values Description
CCE access cce-enabled Enumer-
ation
0=Disable;
3=Enable;
Controls TCP and UDP
access for the CCE
(CommsChannel Extend-
er). This affects the oper-
ation of the OpenStage
Manager, local CTI ac-
cess, and HPT access.
When "Disable all" is se-
lected, both TCP and
UDP are disabled. With
"Enable all", there are no
restrictions.
Factory reset
claw
factory-
reset-
hooded-claw-
enabled
Boolean true/false Enables or disables the
’hooded claw’ keypad
mechanism to initiate a
factory reset without re-
quiring an authenticated
access.
Allow user ac-
cess to diagnos-
tic data
allow-user-
access-to-
diagnostic-
data
Boolean true/false
Default:true
Enables or disables the
user access to diagnostic
data

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing