5
Safety & Precautions (continued)
WARNING: The UV bulb is extremely hot during use. Never touch this bulb as a severe
burn/injury could result.
WARNING: DO NOT touch the UV light bulb with your hands as it will shorten the life of the
bulb. If the bulb is touched immediately wipe the area with isopropyl alcohol (IPA). DO NOT
wipe the bulb with IPA unless the bulb is cool.
WARNING: When working around the UV unit with the power on you must wear the UV Safety
Glasses (provided) to protect your eyes from direct or indirect (reection from paper) exposure
to the UV rays. UV rays can severely damage your eyes.
CAUTION: When handling the UV Coating, please use safety gloves (provided) for skin protec-
tion.
CAUTION: Please read and observe the UV coating Material Safety Data Sheets (MSDS) for
the various personal, work and environmental recommendations. The MSDS sheets should be
easily accessible in the event of an emergency.
CAUTION: Keep UV coating away from heat and/or open ame. Keep UV containers in a cool
and dry location. Do not allow UV coating to freeze.
CLEAN, CLEAN, CLEAN!
It is extremely important to clean and maintain your iColor coater
properly in order to produce the outstanding coating output that your
customers expect.
If you do not properly clean and maintain your iColor coater, it will
not perform properly.
Also, failure to clean and maintain your iColor coater will void your
warranty.
To Next Page
Loading...
