Uninet iColor User Manual

6
Safety & Precautions (continued)
At Uninet, Safety is our number one priority!
Interlocking Guards, Fixed Guards and Warning Labels are used when necessary and are clearly
visible, to protect all operators. If a safety sticker becomes damaged, please contact Uninet to
purchase a replacement!
Please nd below a visual representation of our Safety Guards. If the front safety guard is opened, the
conveyor will shut down immediately, the UV light will drop to the lowest setting and the reector hous-
ing will rotate to the idle position. The fan will continue to operate. If the rear safety guard is opened
the UV lamp, conveyor & fans will instantly shut down. Upon closing the rear guard, the fan will begin
to operate and begin running the cooling cycle. You may turn on the UV at this time, however note it
could take up to 2 minutes for the lamp to engage.
Figure - Front Safety Guard Figure - UV Chamber Access Panel
(Rear Safety Guard)

Uninet iColor Specifications

General

Brand	Uninet
Model	iColor
Category	Finishers
Language	English