Uniphone 1150 - Installing a Battery

To Next Page

To Previous Page

•

SET-UP

9-Volt

battery

Take off the

cover.

Step 2

Unscrew the

battery cover.

Step 1

Replace the

battery cover.

Step 4

Snap the bat-

tery connector

onto the bat-

tery and place

the battery in-

side the com-

partment.

Step 3

Installing a battery

Installing a battery will allow you to use the Uniphone 1150

continuously for an hour during a power failure. A battery also

saves any settings or message changes if there is a power fail-

ure. Use a 9-volt alkaline battery. The battery compartment is

on the bottom of the Uniphone 1150. Follow the steps below to

install a battery.